Filter
Top Products
Reference Manual
IP2030/RM, Rev AA
Appendix B: Product Certifications
June 2014
123
Appendix B: Product Certifications
Appendix B Product Certifications
Safety messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 123
European directive information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 124
Hazardous locations certifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 124
B.1 Safety messages
Procedures and instructions in this section may require special precautions to ensure the safety
of the personnel performing the operations. Information that raises potential safety issues is
indicated by a warning symbol ( ). Please refer to the following safety messages before
performing an operation preceded by this symbol.
Explosions could result in death or serious injury:
Verify that the operating environment of the MCU900 Series control unit is consistent
with the appropriate hazardous locations certifications
Failure to follow safe installation and servicing guidelines could result in death or
serious injury:
Make sure the MCU900 Series control unit is installed by qualified personnel and in
accordance with applicable code of practice
Use the equipment only as specified in this manual. Failure to do so may impair the
protection provided by the equipment
Do not perform any service other than those contained in this manual unless you are
qualified
High voltage that may be present on leads could cause electrical shock:
Avoid contact with leads and terminals
Make sure the main power to the MCU900 Series control unit is off