Filter
Top Products
706 CHAPTER 22: SNOOP COMMANDS
display snoop Displays the MAP radio mapping for all snoop filters.
Syntax —
display snoop
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 4.0.
Usage — To display the mappings for a specific MAP radio, use the
display snoop map command.
Examples — The following command shows the MAP radio mappings
for all snoop filters configured on a WX switch:
WX1200# display snoop
ap: 3 Radio: 2
snoop1
snoop2
ap: 2 Radio: 2
snoop2
See Also
clear snoop map on page 700
display snoop map on page 707
set snoop map on page 704
display snoop info Shows the configured snoop filters.
Syntax —
display snoop filter-name
filter-name — Name of the snoop filter.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 4.0.