3Com WXR100 3CRWXR10095A Video Game Controller User Manual


 
set radio-profile countermeasures 411
configured — Configures radios to attack only devices in the attack
list on the WX switch (on-demand countermeasures). When this
option is specified, devices found to be rogues by other means, such
as policy violations or by determining that the device is providing
connectivity to the wired network, are not attacked.
none — Disables countermeasures for this radio profile.
Defaults — Countermeasures are disabled by default.
Access — Enabled.
History Command introduced in MSS Version 4.0. New option
configured added to support on-demand countermeasures in MSS
Version 4.1.
Examples — The following command enables countermeasures in radio
profile radprof3 for rogues only:
WX1200# set radio-profile radprof3 countermeasures rogue
success: change accepted.
The following command disables countermeasures in radio profile
radprof3:
WX1200# clear radio-profile radprof3 countermeasures
success: change accepted.
The following command causes radios managed by radio profile radprof3
to issue countermeasures against devices in the WX switch’s attack list:
WX1200# set radio-profile radprof3 countermeasures configured
success: change accepted.
Note that when you issue this command, countermeasures are then
issued only against devices in the WX attack list, not against other devices
that were classified as rogues by other means.
See Also
display radio-profile on page 350