Filter
Top Products
156 CHAPTER 7: IP SERVICES COMMANDS
See Also
clear ip telnet on page 141
display ip telnet on page 158
set ip https server on page 177
set ip telnet on page 181
set ip telnet server on page 182
display ip route Displays the IP route table on the WX.
Syntax —
display ip route [destination]
destination — Route destination IP address, in dotted decimal
notation.
Defaults — None.
Access — All.
History —Introduced in MSS Version 3.0.
Table 36 Output for display ip https
Field Description
HTTPS is
enabled/disabled
State of the HTTPS server:
Enabled
Disabled
HTTPS is set to use port TCP port number on which the WX switch listens for
HTTPS connections.
Last 10 connections List of the last 10 devices to establish connections to
the WX HTTPS server.
IP Address IP address of the device that established the
connection.
Note: If a browser connects to a WX from behind a
proxy, then only the proxy IP address is shown. If
multiple browsers connect using the same proxy, the
proxy address appears only once in the output.
Last Connected Time when the WX switch established the HTTPS
connection to the WX switch.
Time Ago (s) Number of seconds since the device established the
HTTPS connection to the WX switch.