Filter
Top Products
traceroute 207
Examples — In the following example, an administrator establishes a
Telnet session with another device and enters a command on the remote
device:
WX4400# telnet 10.10.10.90
Session 0 pty tty2.d Trying 10.10.10.90...
Connected to 10.10.10.90
Disconnect character is '^t'
Copyright (c) 2004 3Com Corporation. All rights reserved.
Username: username
Password: password
WX1200-remote> display vlan
Admin VLAN Tunl Port
VLAN Name Status State Affin Port Tag State
---- ---------------- ------ ----- ----- ---------------- ----- -----
1 default Up Up 5
3 none Up
3 red Up Up 5
10 backbone Up Up 5
1 none Up
2 none Up
4094 web-aaa Up Up 0
2 4094 Up
When the administrator presses Ctrl+t to end the Telnet connection, the
management session returns to the local prompt:
WX1200-remote> Session 0 pty tty2.d terminated tt name tty2.d
WX1200#
See Also
clear sessions on page 613
display sessions on page 616
traceroute Traces the route to an IP host.
Syntax —
traceroute host [dnf] [no-dns] [port port-num]
[queries num] [size size] [ttl hops] [wait ms]
host — IP address, hostname, or alias of the destination host. Specify
the IP address in dotted decimal notation.