Filter
Top Products
set radio-profile rfid-mode 421
set radio-profile
rfid-mode
Enables MAP radios managed by a radio profile to function as location
receivers in an AeroScout Visibility System. An AeroScout Visibility System
allows system administrators to track mobile assets using RFID tags.
When you enable RFID mode on a radio profile, radios in the profile can
receive and process signals transmitted by RFID tags and relay them with
related information to the AeroScout Engine. If the floor plan is modeled
in 3WXM, you also can use 3WXM to display the locations of assets.
Syntax
— set radio-profile name rfid-mode {enable | disable}
name—Radio profile name.
enable—Enables radios to function as asset location receivers.
disable—Disables radios from functioning as asset location receivers.
Defaults — The default is disable.
Access — Enabled.
History —Introduced in MSS Version 5.0.
Examples — The following command enables radios managed by radio
profile rp1 to act as asset location receivers:
WX1200# set radio-profile rfid-mode enable
success: change accepted.
See Also
set radio-profile mode on page 416
display radio-profile on page 350
set radio-profile
rate-enforcement
Configures MSS to enforce data rates, which means that a connecting
client must transmit at one of the mandatory or standard rates in order to
associate with the MAP.
Syntax —
set radio-profile name rate-enforcement {enable |
disable}
name — Radio profile name.
enable — Enables data rate enforcement for the radios in the radio
profile.
disable — Disables data rate enforcement for the radios in the radio
profile.