Filter
Top Products
504 CHAPTER 12: STP COMMANDS
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — The following command changes the hello interval for all
VLANs to 4 seconds:
WX4400# set spantree hello 4 all
success: change accepted.
See Also
display spantree on page 488
set spantree
maxage
Changes the maximum age for an STP root bridge hello packet that is
acceptable to a wireless LAN switch acting as a designated bridge on one
or all of its VLANs. After waiting this period of time for a new hello
packet, the WX switch determines that the root bridge is unavailable and
issues a topology change message.
Syntax —
set spantree maxage aging-time {all | vlan vlan-id}
aging-time — Maximum age value. You can specify from 6 through
40 seconds.
all — Changes the maximum age on all VLANs.
vlan vlan-id — VLAN name or number. MSS changes the maximum
age on only the specified VLAN.
Defaults — The default maximum age for root bridge hello packets is 20
seconds.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — The following command changes the maximum acceptable
age for root bridge hello packets on all VLANs to 15 seconds:
WX4400# set spantree maxage 15 all
success: change accepted.
See Also
display spantree on page 488