Filter
Top Products
594 CHAPTER 17: 802.1X MANAGEMENT COMMANDS
clear dot1x
bonded-period
Resets the Bonded Auth™ (bonded authentication) period to its default
value. The bonded period is the number of seconds MSS retains session
information for an authenticated machine while waiting for an 802.1X
client on the machine to start (re)authentication for the user. When
bonded authentication is enabled, it applies only to an 802.1X user
whose authentication rule on the WX switch contains the bonded
option.
Syntax —
clear dot1x bonded-period
Defaults — The default bonded authentication period is 0 seconds,
which disables the feature.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — To reset the Bonded period to its default, type the following
command:
WX4400# clear dot1x bonded-period
success: change accepted.
set dot1x reauth-period on page 609
clear dot1x reauth-period on page 597
Retransmission set dot1x max-req on page 605
clear dot1x max-req on page 595
Quiet Period and Timeouts set dot1x quiet-period on page 607
clear dot1x quiet-period on page 596
set dot1x timeout auth-server on page 609
clear dot1x timeout auth-server on
page 598
set dot1x timeout supplicant on page 610
clear dot1x timeout supplicant on page 598
Settings, Active Clients, and
Statistics
display dot1x on page 599
Table 92 802.1X Commands by Usage (continued)
Type Command