3Com WXR100 3CRWXR10095A Video Game Controller User Manual


 
350 CHAPTER 11: MANAGED ACCESS POINT COMMANDS
display
radio-profile
Displays radio profile information.
Syntax
display radio-profile {name | ?}
name — Displays information about the named radio profile.
?Displays a list of radio profiles.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0. Name of the backoff timer
field changed from Client Backoff Timer to Power Backoff Timer and new
fields added in MSS Version 4.0:
Countermeasures
Active-Scan
WMM enabled
Version 4.2 has the following changes:
WMM enabled field renamed to QoS Mode.
Long Retry Limit and Short Retry Limit fields moved to display
service-profile output. (These options are now configurable on a
service-profile basis instead of a radio-profile basis.)
Allow 802.11g clients only field removed. (This option is now
configured using the set service-profile transmit-rates command.)
Usage — MSS contains a default radio profile. 3Com recommends that
you do not change this profile but instead keep the profile for reference.
Examples — The following command shows radio profile information
for the default radio profile:
WX4400# display radio-profile default
Beacon Interval: 100 DTIM Interval: 1
Max Tx Lifetime: 2000 Max Rx Lifetime: 2000
RTS Threshold: 2346 Frag Threshold: 2346
Long Preamble: no Tune Channel: yes
Tune Power: no Tune Channel Interval: 3600
Tune Power Interval: 600 Channel Holddown: 300
Power Backoff Timer: 10 Countermeasures: none
Active-Scan: yes QoS Mode: wmm