Filter
Top Products
Appendix 2 Standards
A-11
Appendix 2 Standards
MICRO-EH products are global products designed and manufactured for use throughout the world. They should be installed and
used in conformance with product-specific guidelines as well as the following agency approvals and standards.
Item Standards
Industrial Control
Equipment[Safety]
UL 508
CSA C22.2 no 142-M1987
Certification by Underwriters Laboratories for
selected modules
Hazardous Locations[Safety]
Class I, Div II, A,B,C,D
UL 1604
CSA C22.2 No142-M1987
Certification by Underwriters Laboratories for
selected modules
European EMC Directive IEC 61131-2 (2003) Emission, Immunity
European Low Voltage Directive IEC 61131-2 (1994)
Australia C-tick mark AS/AZN CISPR11 (2002)
Warning:
Explosion hazard – substitution of componets may impair suitability for class I, division 2"
Do not replace modules unless power has been switched off or the area is known to be non-hazardous.
Do not disconnect equipment unless power has been switched off or the area is known to be non-hazardous.