Filter
Top Products
Chapter 5 Instruction Specifications
5-84
Item number Application instructions-13 Name Copy
Ladder format Condition code
Processing time (µs)
Remark
R7F4 R7F3 R7F2 R7F1 R7F0
Average Maximum
COPY (d, s, n) DER ERR SD V C
↕
zzzz
Instruction format Number of steps
Condition Steps
As per the table
below.
COPY (d, s, n) 4
Bit Word Double word
Usable I/O
XY
R,
M
TD, SS,
CU, CT WX WY
WR,
WM TC DX DY
DR,
DM
Constant
Other
d Copy destination head I/O {{
s Copy source head I/O {{{ {{{{ {
n
Number of bits (words)
to be copied
{{{{ {
The constant is set in
decimal.
Function
• The value of s (bit, word) is copied from d to d + n - 1.
• The value of s is retained.
• A bit is copied to bits and a word is copied to words.
d+n-1
d
s
s
s
s
s
s
s
ssss
n bits (words)
If n is a word: The contents (0 to 255) of the lower 8 bits (b7 to b0) of n (WX, WY, WR, WM, TC) are set to the
number of bits (words) to be copied.
If n is a constant: 0 to 255 (decimal) can be designated for the number of bits (words) to be copied.
Notes
• Use this instruction so that d + n - 1 does not exceed the I/O range (R7BF, M3FFF, WRFFF, and WM3FF). If it exceeds the
I/O range, DER is equal to '1' and transfers to the maximum range.
• If n is equal to “0,” the block copy is not be performed and DER (R7F4) will be set to “0.”
COPY (d, s, n)
Processing time (
µ
s) (Average)
n
Bit Word
180 73
16 83 114
32 83 148
64 88 224
128 95 381
255 109 785