Filter
Top Products
EXCEL 10 W7750A,B,C CONSTANT VOLUME AHU CONTROLLER
93 74-2958—1
nvoError error_bit[3]
Byte Offset = 3
Bit Offset = 5
(nvFree2Error)
FALSE
TRUE
0
1
FALSE Free2Error: All control functions associated with the failed NV are disabled
as if the NV was not configured.
nvoError error_bit[3]
Byte Offset = 3
Bit Offset = 6
(nvTimeClockError)
FALSE
TRUE
0
1
FALSE TimeClockError: All control functions associated with the failed NV are
disabled as if the NV was not configured.
nvoError error_bit[3]
Byte Offset = 3
Bit Offset = 7
(nvWSHPEnError)
FALSE
TRUE
0
1
FALSE WSHPEnError: All control functions associated with the failed NV are
disabled as if the NV was not configured.
NetConfig nciNetConfig CFG_LOCAL
CFG_EXTERNAL
CFG_NUL
0
1
255
CFG_LOCAL All nodes that support self-installation provide a configuration variable to
allow a network management tool to also install the node. nciNetConfig is
only used by a network management tool and may have the following
values: CFG_LOCAL - Node will use self installation functions to set its own
network image. CFG_EXTERNAL - The nodes network image has been set
by an external source.
Table 23. Status Points. (Continued)
User Address NvName Field Name
Engineering Units: English
(Metric) or States plus Range
Digital State or
Value of State
Default
E-Vision (M, P, S)
Share
Map
Direct Access
Hardware Config.
Manual Config.
Test
E-Vision Legend: (M) Monitor, (P) Parameter, (S) Schematic
Comments
Table 24. Calibration Points.
User Address NvName Field Name
Engineering Units: English
(Metric) or States plus Range
Digital State or
Value of State
Default
E-Vision (M, P, S)
Share
Map
Direct Access
Hardware Config.
Manual Config.
Test
E-Vision Legend: (M) Monitor, (P) Parameter, (S) Schematic
Comments
nvoRaw K1Raw
K2Raw
Ai1Resistive
Ai2Resistive
Ai3Voltage
Ai4Voltage
RawSpaceTemp
RawSetPoint
Counts
0 to 65535
0 raw_data contains the analog to digital converter counts measured from the
analog input channel.