Filter
Top Products
Viewing target device connection information Appliance Management Panel
88
590-590-609A
-or-
• To enable all traps, click the Enable All button.
-or-
• To disable all traps, click the Disable All button.
Complete one of the following steps:
•Click Apply to save any changes without exiting the AMP.
-or-
•Click OK to save any changes and exit the AMP.
-or-
•Click Cancel to exit the AMP without saving any changes.
5.8 Viewing target device connection
information
The Devices category displays connection information for each target device, as
follows:
• KVM-IA - The display shows the EID of the KVM-IA.
• Cascaded switch - The display shows the cascade switch and all of its channels.
• No device connection - The display indicates “None”.
When you select the Devices category for the first time, the AMP retrieves the target
devices that exist in the software database as well as information on how the target
devices are connected to the selected appliance. The Connections column lists the
current target device connection. This can be to either a KVM-IA or a cascade switch. If
connected to a KVM-IA, the KVM-IA EID is visible in the Connections column. If
connected to a cascade switch, the cascade switch and all of its channels are visible. If
no unit is currently connected to the path, then this field displays “None”.
Clicking on a hyperlink of a target device entry opens the Video Viewer.
You can resynchronize the database on the computer with the database on the
appliance from this category. See Figure 31 on page 89.
5.8.1 Modifying target device names
The Devices category can be used to modify the target device name on both the
appliance and in the client database.
Click the Settings tab in the AMP.
Select the Devices category.