Filter
Top Products
KVM s3 Client Explorer Viewing and changing network properties
23
590-590-609A
In the Site, Department, and Location fields, select an entry from the pull-down
menu or enter a 1 to 32 character Site, Department, or Location in the correspond-
ing text field.
Complete one of the following steps:
• Click another tab to change additional properties.
-or
• If finished, click OK to save the new settings.
-or-
•Click Cancel to exit without saving the new settings.
3.5.3 Viewing and changing network properties
For an appliance, network properties include the address of the appliance.
For a target device, network properties specify the URL to use when establishing a
browser connection to the target device. When this field contains a value, the Browse
button is visible in the Explorer task bar.
Select a unit in the Unit list.
Complete one of the following steps:
•Select View - Properties from the Explorer menu.
-or-
• Click the Properties button.
-or-
• Right-click on the unit. Select Properties from the pop-up menu.
The Properties window opens.
Click the Network tab.
In the Address field (appliances only), enter the appliance address in IP dot nota-
tion or 1 to 128 character host name. The address cannot be blank, a loopback
address, or all zeros. You cannot enter duplicate addresses.
In the Browser URL field (devices only), enter a 1 to 256 character URL for estab-
lishing a browser connection.
Complete one of the following steps:
• Click another tab to change additional properties.
-or-
• If finished, click OK to save the new settings.
-or-
•Click Cancel to exit without saving the new settings.