Filter
Top Products
Installing a new appliance with no assigned IP address KVM s3 Client Explorer
16
590-590-609A
The Enter Cascade Switch Information window opens if the software detects an
attached cascade switch. This window contains a list of all ports and KVM-IA EIDs
(Electronic Identification Numbers) retrieved from the appliance and the cascaded
switch types to which they are connected, if any. When this window first opens, all
cascade switch names are set to None. Detected cascade switches have an icon
next to the pull-down menu.
a. The Existing Cascaded Switches field contains all the current cascade
switch types defined in the database. Click Add, Delete, or Modify to alter the
list.
b. Associate the applicable cascade switch types from the pull-down menus for
each KVM-IA that has a cascade switch attached.
When you reach the final page of the Wizard, click Finish to exit the Wizard and
return to the main window. The appliance is now included in the Unit list.
3.2.2 Installing a new appliance with no assigned IP
address
Complete one of the following steps:
•Select File - New - Appliance from the Explorer menu
-or-
• Click the New Appliance button.
The New Appliance Wizard opens. Click Next.
Click No to indicate that the appliance does not have an assigned IP address, then
click Next.
The Network Address window opens. Type the IP address, subnet mask, and gate-
way you want to assign to the appliance and then click Next.
The software searches for any appliances that do not have assigned IP addresses.
Select the unit to add from the list of new appliances that were found and then
click Next.
The Configuring Appliance window indicates whether the IP information was config-
ured. If the configuration is complete, the software searches for the new appliance.
Click Next.
The software also searches for all KVM-IAs and target device names associated
with the appliance.
The Enter Cascade Switch Information window opens if the software detects an
attached cascade switch. This window contains a list of all ports and KVM-IA EIDs
retrieved from the appliance and the cascade switch types to which they are
connected, if any.
a. The Existing Cascaded Switches field contains all the current cascade switch
types defined in the database. Click Add, Delete, or Modify to alter the list.
b. Associate the applicable cascade switch type from the pull-down menus for
each KVM-IA that has a cascade switch attached.
When complete, click Finish to exit the Wizard and return to the main window. The
appliance is now included in the Unit list.