Filter
Top Products
Resynchronizing the target device list Appliance Management Panel
90
590-590-609A
Complete one of the following steps:
•Click Apply to save any changes without exiting the AMP.
-or-
•Click OK to save any changes and exit the AMP.
-or-
•Click Cancel to exit the AMP without saving any changes.
5.8.2 Resynchronizing the target device list
You might need to resynchronize the target device list if the local user has changed
target device names on the appliance using the OSCAR interface or if KVM-IAs have
been added or moved.
Prior to starting the resynchronization process, a warning message indicates that the
database will be updated to match the current configuration in the appliance. This
warning contains a check box that indicates whether offline KVM-IAs will be included.
When enabled, target devices associated with KVM-IAs that are offline are included.
When disabled, offline KVM-IAs are not included and any existing target devices
associated with them in the database are removed.
This procedure only resynchronizes your own KVM s3 Client client. To keep databases
consistent when you have multiple computers using the software, save your
resynchronized local database and restore it to the other computers.
Click the Settings tab in the AMP.
Select the Devices category.
Click the Resync button. The Resync Wizard opens. Click Next.
A warning message indicates that the database will be updated to match the
current configuration in the appliance. Select or clear the Include Offline KVM-IAs
check box. Click Next.
A Polling Appliance message is displayed with a progress bar indicating that
appliance information is being retrieved.
Complete one of the following steps:
• If no changes were detected in the appliance, a completion window opens with
this information. Click OK.
-or-
• If target device changes were detected, the Detected Changes window opens.
Click Next to update the database.
-or-
• If a cascade switch was detected, the Enter Cascaded Switch Information win-
dow opens. Select the type of cascade switch connected to the appliance from
the pull-down menu. If the type you are looking for is not available, you can add
it using the Add button. For more information, see “Configuring cascade switch
connections” on page 91. Click Next.
The completion window opens. Click Finish to exit.