Filter
Top Products
Appliance Management Panel Configuring cascade switch connections
91
590-590-609A
5.9 Configuring cascade switch connections
The Cascade Switches category displays cascade switch information, including the
KVM-IAs, EIDs, cascade switch type, and the port to which each is connected.
Click the Settings tab in the AMP.
Select the Cascaded Switches category.
Figure 32: AMP Settings - Cascaded Switches
Complete one of the following steps:
• Click the pull-down list next to the cascade switch and select the cascade
switch type to assign.
• If the cascade switch type is not in the pull-down list, add a cascade switch to
the Existing Cascaded Switches list by clicking the Add button. The Add
Cascaded Switch window opens.
Type the name of the cascade switch and select the cascade switch type from
the list.
Click OK to add the cascade switch. The cascade switch is now in the Existing
Cascaded Switches list and in the Cascade Switch pull-down list.
Repeat step 3 for each cascade switch to be configured.