Filter
Top Products
KVM s3 Client Explorer Adding an appliance
15
590-590-609A
3.2 Adding an appliance
Before you can access the appliance through the software, you must add it to the
software database. After an appliance is added, it is visible in the Unit list. You can
either manually add or discover an appliance.
3.2.1 Adding an appliance with an assigned IP address
Complete one of the following steps:
•Select File - New - Appliance from the Explorer menu.
-or-
• Click the New Appliance button.
The New Appliance Wizard opens. Click Next.
Figure 2: New Appliance Wizard
Select the type of appliance you are adding. Click Next.
Click Yes to indicate that the appliance has an assigned IP address, then click
Next.
Type the IP address and click Next.
The software searches for the appliance.
The software searches for the indicated unit as well as all the powered KVM-IAs
and target device names you associated with it in OSCAR, if any. To search for
unpowered KVM-IAs, you can access the resync feature in the Devices category of
the AMP and select the Include Offline KVM-IA check box.