Filter
Top Products
Ports used by the software Appendixes
104
590-590-609A
6.4 Ports used by the software
Table 11 lists the port numbers that the software uses to communicate with certain
appliances. This information can be used to configure firewalls to let KVM s3 Client
operate in the networks.
6.5 Technical Support
Our Technical Support staff is ready to assist you with any installation or operating
issues you encounter with your Fujitsu Siemens product. If an issue should develop,
follow the steps below for the fastest possible service: Check the pertinent section of
this manual to see if the issue can be resolved by following the procedures outlined.
Check our web site at http://www.fujitsu-siemens.com/support/ and click on
Services &
Support
. Click
helpdesk
on the left side of the page for a listing of technical support
phone numbers in your area.
Port
Number
Appliance Type Purpose
3211 KVM s2-0411
KVM s2-1611
KVM s3-1621
KVM s3-1641
TCP Proprietary management protocol
3211 KVM s2-0411
KVM s2-1611
KVM s3-1621
KVM s3-1641
UDP Proprietary install and discovery
protocol
2068 KVM s2-0411
KVM s2-1611
KVM s3-1621
KVM s3-1641
TCP Encrypted keyboard and mouse
data
2068 KVM s2-0411
KVM s3-1621
KVM s3-1641
TCP Digitized video data
2068 KVM s3-1621
KVM s3-1641
TCP Virtual media
8192 KVM s2-1611 TCP Digitized video data
Table 11: Ports Used by the KVM s3 Client