Filter
Top Products
Appliance Management Panel Configuring Global Network settings
63
590-590-609A
Figure 17: AMP Global Network settings
In the IP Address field, enter the appliance address in IP dot notation. The value
cannot be a loopback address or all zeros. This field can be modified only if DCHP
is disabled.
In the Subnet Mask field, enter the appliance subnet mask in IP address dot
notation. The value cannot be a loopback address or all zeros. This field can be
modified only if DCHP is disabled.
In the Gateway field, enter the appliance gateway address in IP address dot
notation. The value cannot be a loopback address. If there is no gateway address,
enter 0.0.0.0. This field can only be modified if DCHP is disabled.
In the LAN Speed field, select a value from the pull-down menu.