3Com WX1200 3CRWX120695A Video Game Controller User Manual


 
84 CHAPTER 4: PORT COMMANDS
For error reporting, the cyclic redundancy check (CRC) errors include
misalignment errors. Jumbo packets with valid CRCs are not counted. A
short packet can be reported as a short packet, a CRC error, or an
overrun. In some circumstances, the transmitted octets counter might
increment a small amount for a port with nothing attached.
Examples — The following command starts the port statistics monitor
beginning with octet statistics (the default):
WX4400# monitor port counters
As soon as you press Enter, MSS clears the window and displays statistics
at the top of the window.
Port Status Rx Octets Tx Octets
===============================================================================
1 Up 27965420 34886544
...
To cycle the display to the next set of statistics, press the Spacebar. In this
example, packet statistics are displayed next:
Port Status Rx Unicast Rx NonUnicast Tx Unicast Tx NonUnicast
===============================================================================
1 Up 54620 62144 68318 62556
...
Table 16 describes the port statistics displayed by each statistics option.
The Port and Status fields are displayed for each option.
Table 16 Output for monitor port counters
Statistics Option Field Description
Displayed for All
Options
octets
Port Port the statistics are displayed for.
Status Port status. The status can be Up or Down.
Rx Octets Total number of octets received by the port.
This number includes octets received in frames
that contained errors.
Tx Octets Total number of octets received.
This number includes octets received in frames
that contained errors.