Filter
Top Products
76 CHAPTER 4: PORT COMMANDS
receive-etherstats — Shows Ethernet statistics for received
packets.
transmit-etherstats — Shows Ethernet statistics for transmitted
packets.
port port-list — List of physical ports. If you do not specify a port
list, MSS shows statistics for all ports.
Defaults — None.
Access — All.
History — Introduced in MSS Version 3.0.
Usage — You can specify one statistic type with the command.
Examples — The following command shows octet statistics for port 3:
WX1200> display port counters octets port 3
Port Status Rx Octets Tx Octets
=============================================================================
3 Up 27965420 34886544
This command’s output has the same fields as the monitor port counters
command. For descriptions of the fields, see Table 16 on page 84.
See Also
clear port counters on page 71
monitor port counters on page 82
display port-group Shows port group information.
Syntax —
display port-group [name group-name]
name group-name — Shows information for the specified port group.
Defaults — None.
Access — All.
History — Introduced in MSS Version 3.0. In Version 4.2 the option all
was removed for simplicity. You can display information for all groups by
entering the command without specifying a group name.