Filter
Top Products
540 CHAPTER 14: SECURITY ACL COMMANDS
Syntax — clear security acl map {acl-name | all} {vlan vlan-id |
port port-list [tag tag-value] | ap ap-num} {in | out}
acl-name — Name of an existing security ACL to clear. ACL names
start with a letter and are case-insensitive.
all — Removes security ACL mapping from all physical ports, virtual
ports, and VLANs on a WX switch.
vlan vlan-id — VLAN name or number. MSS removes the security
ACL from the specified VLAN.
port port-list — Port list. MSS removes the security ACL from the
specified WX physical port or ports.
tag tag-value — Tag value that identifies a virtual port in a VLAN.
Specify a value from 1 through 4095. MSS removes the security ACL
from the specified virtual port.
ap ap-num — One or more MAPs, based on their connection IDs.
Specify a single connection ID, or specify a comma-separated list of
connection IDs, a hyphen-separated range, or any combination, with
no spaces. MSS removes the security ACL from the specified MAPs.
in — Removes the security ACL from traffic coming into the WX
switch.
out — Removes the security ACL from traffic going out of the WX
switch.
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — To clear a security ACL map, type the name of the ACL with the
VLAN, physical port or ports, virtual port tag, or Distributed MAP and the
direction of the packets to stop filtering. This command deletes the ACL
mapping, but not the ACL.
Examples — To clear the mapping of security ACL acljoe from port 4 for
incoming packets, type the following command:
WX4400# clear security acl map acljoe port 4 in
clear mapping accepted