Filter
Top Products
238 CHAPTER 8: AAA COMMANDS
start-stop — Sends accounting records at the start and end of a
network session.
stop-only — Sends accounting records only at the end of a network
session.
method1, method2, method3, method4 — At least one of up to four
methods that MSS uses to process accounting records. Specify one or
more of the following methods in priority order. If the first method
does not succeed, MSS tries the second method, and so on.
A method can be one of the following:
local — Stores accounting records in the local database on the
WX switch. When the local accounting storage space is full, MSS
overwrites older records with new ones.
server-group-name — Stores accounting records on one or more
Remote Authentication Dial-In User Service (RADIUS) servers. You
can also enter the names of existing RADIUS server groups as
methods.
Defaults — Accounting is disabled for all users by default.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Usage — For network users with start-stop accounting profiles whose
records are sent to a RADIUS server, MSS sends interim updates to the
RADIUS server when the user roams.
Examples — The following command issues stop-only records to the
RADIUS server group sg2 for network user Nin, who is authenticated by
802.1X:
WX4400# set accounting dot1x Nin stop-only sg2
success: change accepted.
See Also
clear accounting on page 213
display accounting statistics on page 232