Filter
Top Products
60 CHAPTER 3: SYSTEM SERVICE COMMANDS
display config on page 675
set system name on page 68
set system contact Stores a contact name for the WX switch.
Syntax — set system contact string
string — Alphanumeric string up to 256 characters long, with no
blank spaces.
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
To view the system contact string, type the display system command.
Examples — The following command sets the system contact
information to tamara@example.com:
WX1200# set system contact tamara@example.com
success: change accepted.
See Also
clear system on page 44
display system on page 47
set system location on page 67
set system name on page 68