Filter
Top Products
712 CHAPTER 23: SYSTEM LOG COMMANDS
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — To stop sending system logging messages to a server at
192.168.253.11, type the following command:
WX4400# clear log server 192.168.253.11
success: change accepted.
Type the following command to clear all messages from the log buffer:
WX4400# clear log buffer
success: change accepted.
See Also
clear log trace on page 692
set log on page 716
display log buffer Displays system information stored in the nonvolatile log buffer or the
trace buffer.
Syntax —
display log buffer [{+|-}number-of-messages]
[facility facility-name] [matching string]
[severity severity-level]
buffer — Displays the log messages in nonvolatile storage.
+|- number-of-messages — Displays the number of messages
specified as follows:
A positive number (for example, +100), displays that number of log
entries starting from the oldest in the log.
A negative number (for example, -100) displays that number of log
entries starting from newest in the log.
facility facility-name — Area of MSS that is sending the log
message. Type a space and a question mark (?) after display log
buffer facility for a list of valid facilities.
matching string — Displays messages that match a string—for
example, a username or IP address.