3Com WX1200 3CRWX120695A Video Game Controller User Manual


 
674 CHAPTER 20: FILE MANAGEMENT COMMANDS
Usage — The install soda agent command installs a .zip file containing
SODA agent files into a directory on the WX switch. Prior to installing the
SODA agent files, you must have already copied the .zip file to the WX
switch. This command creates the specified directory, unzips the file and
places the contents into the directory. If the specified directory has the
same name as a service profile, then that service profile uses the SODA
agent files in the directory if SODA functionality is enabled for the service
profile.
Examples — The following command installs the contents of the file
soda.ZIP into a directory called sp1.
WX4400# install soda agent soda.ZIP agent-directory sp1
This command may take up to 20 seconds...
See Also
display boot on page 674
set service-profile soda mode on page 462
display boot Displays the system image and configuration filenames used after the last
reboot and configured for use after the next reboot.
Syntax
display boot
Defaults — None.
Access — Access.
History —Introduced in MSS Version 3.0. New fields, Configured boot
version and Backup boot configuration added in MSS Version 4.0.
Examples — The following command shows the boot information for a
WX switch:
WX1200# display boot
Configured boot version: 4.1.0.65
Configured boot image: boot1:wx040100.020
Configured boot configuration: file:configuration
Backup boot configuration: file:backup.cfg
Booted version: 4.1.0.65
Booted image: boot1:wx040100.020
Booted configuration: file:configuration
Product model: WX