3Com WX1200 3CRWX120695A Video Game Controller User Manual


 
638 CHAPTER 19: RF DETECTION COMMANDS
Table 103 display rfdetect clients Output
Field Description
Client MAC MAC address of the client.
Client Vendor Company that manufactures or sells the client.
AP MAC MAC address of the radio with which the rogue client is
associated.
AP Vendor Company that manufactures or sells the AP with which the
rogue client is associated.
Port/Radio/Channel Port number, radio number, and channel number of the radio
that detected the rogue.
NoL Number of listeners. This is the number of MAP radios that
detected the rogue client.
Type Classification of the rogue device:
rogue—Wireless device that is on the network but is not
supposed to be on the network.
intfr—Wireless device that is not part of your network and
is not a rogue, but might be causing RF interference with
MAP radios.
known—Device that is a legitimate member of the
network.
Last seen Number of seconds since a MAP radio last detected 802.11
packets from the device.
Table 104 display rfdetect clients mac Output
Field Description
RSSI Received signal strength indication (RSSI)—the strength of the
RF signal detected by the MAP radio, in decibels referred to
1 milliwatt (dBm).
Rate The data rate of the client.
Last Seen Number of seconds since a MAP radio last detected 802.11
packets from the device.
BSSID MAC address of the SSID with which the rogue client is
associated.
Vendor Company that manufactures or sells the AP with which the
rogue client is associated.