Filter
Top Products
328 CHAPTER 11: MANAGED ACCESS POINT COMMANDS
Examples — The following command displays Ethernet statistics for the
Ethernet ports on Distributed MAP 1:
WX4400# display ap etherstats 1
AP: 1 ether: 1
=================================
RxUnicast: 75432 TxGoodFrames: 55210
RxMulticast: 18789 TxSingleColl: 32
RxBroadcast: 8 TxLateColl: 0
RxGoodFrames: 94229 TxMaxColl: 0
RxAlignErrs: 0 TxMultiColl: 47
RxShortFrames: 0 TxUnderruns: 0
RxCrcErrors: 0 TxCarrierLoss: 0
RxOverruns: 0 TxDeferred: 150
RxDiscards: 0
Table 57 describes the fields in this display.
Table 57 Output of display ap etherstats
Field Description
RxUnicast Number of unicast frames received.
RxMulticast Number of multicast frames received.
RxBroadcast Number of broadcast frames received.
RxGoodFrames Number of frames received properly from the link.
RxAlignErrs Number of received frames that were both misaligned and
contained a CRC error.
RxShortFrames Number of received frames that were shorter than the
minimum frame length.
RxCrcErrors Number of received frames that were discarded due to
CRC errors.
RxOverruns Number of frames known to be lost due to a temporary
lack of hardware resources.
RxDiscards Number of frames known to be lost due to a temporary
lack of software resources.
TxGoodFrames Number of frames transmitted properly on the link.
TxSingleColl Number of transmitted frames that encountered a single
collision.
TxLateColl Number of frames that were not transmitted because they
encountered a collision outside the normal collision
window.