3Com WX1200 3CRWX120695A Video Game Controller User Manual


 
set snmp notify profile 187
See Also
clear snmp community on page 143
set ip snmp server on page 180
set snmp notify target on page 192
set snmp notify profile on page 187
set snmp protocol on page 197
set snmp security on page 198
set snmp usm on page 199
display snmp community on page 161
set snmp notify
profile
Configures an SNMP notification profile. A notification profile is a named
list of all the notification types that can be generated by a switch, and for
each notification type, the action to take (drop or send) when an event
occurs.
You can configure up to ten notification profiles.
Syntax
set snmp notify profile {default | profile-name}
{drop | send} {notification-type | all}
default | profile-name — Name of the notification profile you are
creating or modifying. The profile-name can be up to 32 alphanumeric
characters long, with no spaces. To modify the default notification
profile, specify default.
drop | send — Specifies the action that the SNMP engine takes with
regard to the notifications you specify with notification-type or all.
notification-type — Name of the notification type:
APBootTraps—Generated when a MAP access point boots.
ApNonOperStatusTraps—Generated to indicate a MAP radio is
nonoperational.
ApOperRadioStatusTraps—Generated when the status of a
MAP radio changes.
APRejectLicenseExceededTraps—Generated when a WX switch
receives a packet from an inactive AP and attaching that AP would
make the WX switch exceed the maximum (licensed) number of
active APs.