Filter
Top Products
264 CHAPTER 8: AAA COMMANDS
service-type Type of access
requested by the user.
One of the following numbers:
2—Framed; for network user access
6—Administrative; for administrative
access to the WX, with authorization to
access the enabled (configuration)
mode. The user must enter the enable
command to access the enabled mode.
7—NAS-Prompt; for administrative
access to the nonenabled mode only. In
this mode, the enable command is not
available and the user cannot log in to
the enabled mode.
For administrative sessions, the WX
always sends 6 (Administrative).
The RADIUS server can reply with one
of the values listed above.
If the service-type is not set on the
RADIUS server, administrative users
receive NAS-Prompt access, and
network users receive Framed access.
session-timeout
(network access
mode only)
Maximum number of
seconds for the user’s
session.
Number between 0 and 4,294,967,296
seconds (approximately 136.2 years).
ssid
(network access
mode only)
SSID accessible by the
user after
authentication.
Name of the SSID you want the user to
use. The SSID must be configured in a
service profile, and the service profile
must be used by a radio profile
assigned to MAP radios in the Mobility
Domain.
start-date Date and time at which
the user becomes
eligible to access the
network.
MSS does not
authenticate the user
unless the attempt to
access the network
occurs at or after the
specified date and time,
but before the end-date
(if specified).
Date and time, in the following format:
YY/MM/DD-HH:MM
You can use start-date alone or with
end-date. You also can use
start-date, end-date, or both in
conjunction with time-of-day.
Table 44 Authentication Attributes for Local Users (continued)