Filter
Top Products
display crypto ca-certificate 573
Examples — The following commands copy a PKCS #12 object file for
an EAP certificate and key pair—and optionally the certificate authority’s
own certificate—from a TFTP server to nonvolatile storage on the WX
switch, create the one-time password hap9iN#ss, and unpack the
PKCS #12 file:
WX4400# copy tftp://192.168.253.1/2048full.p12 2048full.p12
success: received 637 bytes in 0.253 seconds [ 2517
bytes/sec]
WX4400# crypto otp eap hap9iN#ss
OTP set
WX4400# crypto pkcs12 eap 2048full.p12
Unwrapped from PKCS12 file:
keypair
device certificate
CA certificate
See Also
crypto otp on page 570
display crypto
ca-certificate
Displays information about the certificate authority’s PEM-encoded
PKCS #7 certificate.
Syntax —
display crypto ca-certificate {admin | eap | web}
admin — Displays information about the certificate authority’s
certificate that signed the administrative certificate for the WX switch.
The administrative certificate authenticates the WX to 3WXM or Web
View.
eap — Displays information about the certificate authority’s certificate
that signed the Extensible Authentication Protocol (EAP) certificate for
the WX switch.
The EAP certificate authenticates the WX switch to 802.1X supplicants
(clients).
web — Displays information about the certificate authority’s certificate
that signed the WebAAA certificate for the WX switch.
The WebAAA certificate authenticates the WX switch to WebAAA
clients.
Defaults — None.