3Com WX1200 3CRWX120695A Video Game Controller User Manual


 
set igmp querier 533
set igmp querier Enables or disables the IGMP pseudo-querier on a WX, on one VLAN or
all VLANs.
Syntax
set igmp querier {enable | disable} [vlan vlan-id]
enable — Enables the pseudo-querier.
disable — Disables the pseudo-querier.
vlan vlan-id — VLAN name or number. If you do not specify a
VLAN, the pseudo-querier is enabled or disabled on all VLANs.
Defaults — The pseudo-querier is disabled on all VLANs by default.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — 3Com recommends that you use the pseudo-querier only
when the VLAN contains local multicast traffic sources and no multicast
router is servicing the subnet.
Examples — The following example enables the pseudo-querier on the
orange VLAN:
WX1200# set igmp querier enable vlan orange
success: change accepted.
See Also
display igmp querier on page 519
set igmp receiver Adds or removes a network port in the list of ports on which a WX
forwards traffic to multicast receivers. Static multicast receiver ports are
immediately added to or removed from the list of receiver ports and do
not age out.
Syntax
set igmp receiver port port-list {enable | disable}
port port-list — Network port list. MSS adds the specified ports to
the list of static multicast receiver ports.
enable — Adds the port to the list of static multicast receiver ports.
disable — Removes the port from the list of static multicast receiver
ports.