3Com WX1200 3CRWX120695A Video Game Controller User Manual


 
108 CHAPTER 5: VLAN COMMANDS
Examples — The following command removes port 1 from VLAN green:
WX4400# clear vlan green port 1
This may disrupt user connectivity.
Do you wish to continue? (y/n) [n]y
success: change accepted.
The following command removes port 4, which uses tag value 69, from
VLAN red:
WX1200# clear vlan red port 4 tag 69
This may disrupt user connectivity.
Do you wish to continue? (y/n) [n]y
success: change accepted.
The following command completely removes VLAN marigold:
WX4400# clear vlan marigold
This may disrupt user connectivity.
Do you wish to continue? (y/n) [n]y
success: change accepted.
See Also
set vlan port on page 125
display vlan config on page 118
clear vlan-profile Removes a VLAN profile or individual entries from a VLAN profile.
Syntax — clear vlan-profile profile-name [vlan vlan-name]
Defaults
None.
Access Enabled.
History Introduced in MSS Version 6.0.
Usage A VLAN profile lists the VLANs for which traffic is locally
switched by
MAPs where the VLAN profile is applied. Use this command
to remove individual VLANs from a VLAN profile, or to remove an entire
VLAN profile. If you remove all of the entries from a VLAN profile, the
VLAN profile itself is
removed.
profile-nameVLAN profile name
vlan-nameName of a VLAN to remove from the VLAN profile.