Filter
Top Products
set ap radio tx-power 393
radio-profile name — Radio profile name of up to 16 alphanumeric
characters, with no spaces.
mode enable — Enables radios on the specified ports with the
parameter settings in the specified radio profile.
mode disable — Disables radios on the specified ports.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0. Option auto added for
configuration of the MAP configuration profile. Version 6.0 removed the
dap option.
Usage — When you create a new profile, the radio parameters in the
profile are set to their factory default values.
To enable or disable all radios using a specific radio profile, use set
radio-profile.
Examples — The following command enables radio 1 on MAP 5
assigned to radio profile rp1:
WX1200# set ap 5radio 1 radio-profile rp1 mode enable
success: change accepted.
See Also
clear ap radio on page 308
display radio-profile on page 350
set ap radio mode on page 391
set radio-profile mode on page 416
set ap radio
tx-power
Sets the transmit power of a MAP radio.
Syntax —
set ap ap-number radio {1 | 2} tx-power power-level
ap ap-number — Index value that indentifies the MAP on the WX.
radio 1 — Radio 1 of the MAP.
radio 2 — Radio 2 of the MAP. (This option does not apply to
single-radio models.)