Filter
Top Products
6F3B0250
254
T1/T1S User’s Manual
7. Instructions
FUN 186 ASC ASCII conversion
Expression
Input
-
[
A
ASC
B
]
-
Output
Function
When the input is ON, this instruction converts the alphanumeric characters into the ASCII codes, and
stores them in the register table starting with
B
. (16 characters maximum)
Execution condition
Input Operation Output
OFF No execution OFF
ON Execution ON
Operand
Name Device Re
g
ister Constant Index
X Y R S T. C. XW YW RW SW T C D I J K
A
Characters
Ö
B
Start of
destination
ÖÖÖÖÖÖ
Example
When R030 is ON, the characters ‘ABCDEFGHIJKLMN’ is converted into the ASCII codes, and
the result is stored in 8 registers starting with lower 8 bits (byte) of D0200 (D0200 to D0207).
High Low
F 8 7 0
D0200 H42 (B) H41 (A)
D0201 H44 (D) H43 (C)
D0202 H46 (F) H45 (E)
D0203 H48 (H) H47 (G)
D0204 H4A (J) H49 (I)
D0205 H4C (L) H4B (K)
D0206 H4E (N) H4D (M)
D0207
Note
·
Only the number of bytes converted are stored. The rest are not changed. In the above example, 14
characters are converted into 14 bytes of ASCII code, and these ASCII codes are stored in 7
registers (D0200 to D0206). The data of D0207 remains unchanged.
Previous data is remained
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net