Filter
Top Products
6F3B0250
Basic Hardware and Function
109
6. Programming Information
6.5 T1S memory mode setting
The program capacity of the T1S is 8 k steps. However, user can set the T1S’s program
capacity to 4 k steps. It is called the T1S’s memory mode.
That is, the T1S has two memory modes, 8 k mode and 4 k mode.
In the 4 k mode, on-line program changes become available, although the program
capacity is limited to 4 k steps. Refer to section 6.9 for the on-line debug support
functions.
To set the T1S’s memory mode, write 4 k or 8 k on the Program Size Setting of the
System Parameters using the programming tool. Then execute the EEPROM write
command.
NOTE
There is no memory mode setting for the standard T1. The program capacity of
the standard T1 is 2 k steps fixed.
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net