Filter
Top Products
6F3B0250
Basic Hardware and Function
99
6. Programming Information
Device/
re
g
ister
Name Function
S030 Pro
g
ram error ON at error state (related to SW06)
S031 Scan time over (down) ON when the scan time exceeds 200 ms
S032
-
Reserved
S033
-
Reserved
S034
-
Reserved
S035
-
Reserved
S036
-
Reserved
S037
-
Reserved
S038
-
Reserved
S039
-
Reserved
S03A
-
Reserved
S03B
-
Reserved
S03C
-
Reserved
S03D
-
Reserved
S03E
-
Reserved
S03F
-
Reserved
S040 Timin
g
relay 0.1 s OFF 0.05 s / ON 0.05 s (0.1 s interval)
S041 Timin
g
relay 0.2 s OFF 0.1 s / ON 0.1 s (0.2 s interval)
S042 Timin
g
relay 0.4 s OFF 0.2 s / ON 0.2 s (0.4 s interval) All OFF at the
S043 Timin
g
relay 0.8 s OFF 0.4 s / ON 0.4 s (0.8 s interval) be
g
innin
g
of
S044 Timin
g
relay 1.0 s OFF 0.5 s / ON 0.5 s (1.0 s interval) RUN mode
S045 Timin
g
relay 2.0 s OFF 1.0 s / ON 1.0 s (2.0 s interval)
S046 Timin
g
relay 4.0 s OFF 2.0 s / ON 2.0 s (4.0 s interval)
S047 Timin
g
relay 8.0 s OFF 4.0 s / ON 4.0 s (8.0 s interval)
S048
-
Reserved
S049
-
Reserved
S04A
-
Reserved
S04B
-
Reserved
S04C
-
Reserved
S04D
-
Reserved
S04E Always OFF Always OFF
S04F Always ON Always ON
NOTE
(1) These devices are set by the T1/T1S operating system. These devices are
read only for user.
(2) Devices marked as (down) are set in the ERROR mode. Therefore these
devices cannot be used in the user program.
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net