Filter
Top Products
Language Dictionary - 8
121
STATus:QUEStionable?
This query returns the value of the Questionable Event register. The Event register is a read-only register
which holds (latches) all events that are passed by the Questionable NTR and/or PTR filter. Reading the
Questionable Event register clears it.
Query Syntax
STATus:QUEStionable[:EVENt]?
Parameters
None
Examples
STAT:QUES?
Returned Parameters
<NR1> (register value)
Related Commands
*CLS STAT:QUES:ENAB STAT:QUES:NTR STAT:QUES:PTR
Table 8-5. Bit Configuration of Questionable Status Registers
Bit Position 15 14 13 12 11 10 9 8 7-6 5 4 3 2 1 0
Bit Name not
used
Meas
Ovld
not
used
OC2 not
used
UNR RI UNR
2
not
used
SD OT FP not
used
OCP OV
Bit Weight 16384 4096 1024 512 256 32 16 8 2 1
OV = overvoltage protection has tripped on the main output (output 1)
OCP = overcurrent protection has tripped on the main output (output 2)
FP = the front panel "Local" key has been depressed
OT = overtemperature protection has tripped
SD = opened sense lead detected
UNR2 = output 2 is unregulated (Agilent 66319B/D only)
RI = remote inhibit is active
UNR = the output is unregulated
OC2 = output 2 overcurrent protection has tripped (Agilent 66319B/D only)
Meas Ovld = measurement overload
STATus:QUEStionable:CONDition?
This query returns the value of the Questionable Condition register. That is a read-only register, which
holds the real-time (unlatched) questionable status of the dc source.
Query Syntax
STATus:QUEStionable:CONDition?
Parameters
None
Examples
STAT:QUES:COND?
Returned Parameters
<NR1> (register value)
STATus:QUEStionable:ENABle
This command and its query set and read the value of the Questionable Enable register. This register is a
mask for enabling specific bits from the Questionable Event register to set the questionable summary bit
(QUES) of the Status Byte register. This bit (bit 3) is the logical OR of all the Questionable Event
register bits that are enabled by the Questionable Status Enable register..
Command Syntax
STATus:QUEStionable:ENABle<NRf>
Parameters
0 to 32767
Preset Value
0
Examples
STAT:QUES:ENAB 4098 !enables OC2 and OCP
Query Syntax
STATus:QUEStionable:ENABle?
Returned Parameters
<NR1> (register value)
Related Commands
STAT:QUES?