Filter
Top Products
96 Installing System Components
Removing a Memory Riser
CAUTION: Only trained service technicians are authorized to remove the system
cover and access any of the components inside the system. See your Product
Information Guide for complete information about safety precautions, working
inside the computer, and protecting against electrostatic discharge.
1
Ensure power is removed.
2
Open the system. See "Removing the Top Cover" on page 60.
3
Push the memory riser latches toward the ends of the memory riser. See
Figure 3-17.
4
Lift the memory riser latches to raise the memory riser away from the
system board.
5
Lift the memory riser out of the system.