Filter
Top Products
SLC™ 8000 Advanced Console Manager User Guide 329
Appendix B: Safety Information
Safety Precautions
Please follow the safety precautions described below when installing and operating the SLC
advanced console manager.
Cover
Do not remove the cover of the chassis. There are no user-serviceable parts inside. Opening
or removing the cover may expose you to dangerous voltage that could cause fire or electric
shock. The exception is access to the internal modem and RTC battery. For these you don't
have to remove the chassis cover, but just the battery modem door.
Refer all servicing to Lantronix.
Power Plug
When disconnecting the power cable from the socket, pull on the plug, not the cord.
Always connect the power cord to a properly wired and grounded power source. Do not use
adapter plugs or remove the grounding prong from the cord.
Only use a power cord with a voltage and current rating greater than the voltage and current
rating marked on the SLC unit.
Install the SLC 8000 advanced console manager near an AC outlet that is easily accessible.
Always connect any equipment used with the product to properly wired and grounded power
sources.
To help protect the product from sudden, transient increases and decreases in electrical
power, use a surge suppressor, line conditioner, or uninterruptible power supply (UPS).
Do not connect or disconnect this product during an electrical storm.
Input Supply
Caution: Disconnect all power supply sources before servicing to avoid electric
shock.
Check nameplate ratings to assure there is no overloading of supply circuits that could affect
over current protection and supply wiring.
Grounding
1. Maintain reliable grounding of this product.
2. Pay particular attention to supply connections when connecting to power strips, rather than
directly to the branch circuit.
Fuses
For protection against fire, replace the power-input-module fuse with the same type and rating.