Filter
Top Products
8: Device Ports
SLC™ 8000 Advanced Console Manager User Guide 131
Figure 8-12 Devices > Host Lists
2. Enter the following:
Note: To clear fields in the lower part of the page, click the Clear Host List button.
3. You have the following options:
- To save the host list without adding hosts at this time, click the Add Host List button.
- To add hosts, enter the following:
Host Parameters
Host List Id Displays after a host list is saved.
Host List Name Enter a name for the host list.
Retry Count Enter the number of times the SLC advanced console manager should attempt
to retry connecting to the host list.
Authentication Select to require authentication when the SLC unit connects to a host.
Host Name or IP address of the host.
Protocol Protocol for connecting to the host (TCP, SSH, or Telnet).
Port Port on the host to connect to.