Filter
Top Products
8: Device Ports
SLC™ 8000 Advanced Console Manager User Guide 127
Setting Up Internal Modem Storage
An internal modem may be configured on the Devices > Internal Modem page and accessed
through the Port Number Bar only if it is installed into the SLC 8000 advanced console manager. .
To set up internal modem storage in the SLC 8000 advanced console manager:
1. Insert an internal modem into the SLC unit according to the instructions in Modem Installation
(on page 33).
Note: Your internal modem will appear in the Port Number Bar in the upper right
hand corner once the SLC unit is reboots.
2. Reboot the SLC 8000 advanced console manager.
3. Log into the SLC unit and click Devices.
4. Click Internal Modem. Figure 8-11 shows the page that displays.