Filter
Top Products
14: Command Reference
SLC™ 8000 Advanced Console Manager User Guide 314
show routing
Syntax
show routing [resolveip <enable|disable>] [email <Email Address>]
Description
Sets the routing table to display IP addresses (disable) or the corresponding host names (enable).
You can optionally email the displayed information.
SD Card Commands
Enables or disables access to SD Card devices:
set sdcard access <enable|disable>
Mounts a SD Card for use as a storage device. The SD Card can be used for saving
configurations, firmware updates and device logging.
set sdcard mount
Unmounts a SD Card:
set sdcard unmount
Formats a SD Card:
set sdcard format [filesystem <ext2|fat16|fat32>]
Defaults: filesystem=ext2
Runs a filesystem check on a SD Card (recommended if it does not mount):
set sdcard fsck
Displays a directory listing of a SD Card:
set sdcard dir
Renames a file on a SD Card:
set sdcard rename <Filename> newfile <New Filename>
Copies a file on a SD Card:
set sdcard copy <Filename> newfile <New Filename>
Removes a file on a SD Card:
set sdcard delete <Current Filename>
Displays information about the SD Card device:
show sdcard