Filter
Top Products
3: Installation
SLC™ 8000 Advanced Console Manager User Guide 28
Technical Specifications
Table 3-2 SLC Technical Specifications
Component Description
Serial Interface (Device) (48) RJ45-type 8-conductor connectors which are individually configurable
standard or reversed pinouts
Speed software selectable (300 to 230400 baud)
Note: Device ports for the SLC 8000 advanced console manager are
reversed by default. Do not use rolled cables and adapters when replacing an
SLC 8000 advanced console manager with the SLC 8000 model.
Serial Interface (Console) (1) RJ45-type 8-pin connector (DTE)
Speed software selectable (300 to 230400 baud)
LEDs:
Green light ON indicates data transmission activities
Yellow light ON indicates data receiving activities
Network Interface (2) 10/100/1000 Base-T RJ45 Ethernet
LEDs:
Green light ON indicates a link at 1000 Base-T
Green light OFF indicates a link at other speeds or no link
Yellow light ON indicates a link is established
Yellow light blinking indicates activity
Power Supply AC
(single or dual)
Universal AC power input: 100-240 VAC
50 or 60 Hz IEC 60320/C19IEC-type regional cord set included
Power Supply DC (dual) 20V to 72V input
Power Consumption Less than 25 watts
Dimensions 1U, 1.75 in x 17.25 in x 12 in
Weight 11.5 lbs or less, depending on options
Temperature
Operating: 0 to 50°C (32 to 122°F), 30 to 90% RH, non-condensing
Storage: -20 to 80°C (-4 to 176°F), 10 to 90% RH, non-condensing
Relative Humidity Operating: 10% to 90% non-condensing; 40% to 60% recommended
Storage: 10% to 90% non-condensing
USB Ports
(2) ports, type A, host USB 2.0 (HS, FS, LS)
Memory Card Single memory card slot supporting:
SD
SDHC
Modem
300 bps to 56K bps data rate
Upstream 48K bps, downstream 56K bps
V.44 data compression (V92MB-U, V92HU)
V.42 bis and MNP-5 data compression
V.29 FastPOS support
Caller ID type I and II for select countries
Agency approvals: Transferable FCC68, CS03 and CTR21 certifications,
IEC60601-1 (Medical Electronics) compliant, CE Marking, IEC60950 approved