Filter
Top Products
14: Command Reference
SLC™ 8000 Advanced Console Manager User Guide 309
show log local
Syntax
show log local
Description
View the log for local, NFS, or USB logging (NFS and USB use the current logging settings for the
Device Port). Default is to show the log tail:
show log local|nfs|usb|sdcard <Device Port # or Name> [<parameters>]
Parameters
display <head|tail>
numlines <Number of Lines>
bytes <Bytes to Display>
startbyte <Byte Index>
logfile <NFS, USB or SD card Log File>
Defaults: bytes=1000, startbyte=1, numlines=40
Lists the NFS or USB log files, either for a specific device port, or all log files in a USB or NFS
location:
show log files nfs|usb|sdcard [localdir <NFS Mount Local Directory>]
[usbport <U1|U2>]
[deviceport <Device Port # or name>]
Network Commands
set network
Syntax
set network <parameters>
Parameters
interval <1-99999 Seconds>
ipforwarding <enable|disable>
probes <Number of Probes>
startprobes <1-99999 Seconds>
Description
Sets TCP Keepalive and IP Forwarding network parameters.
set network dns
Syntax
set network dns <1|2|3> ipaddr <IP Address>