Filter
Top Products
12: Maintenance
SLC™ 8000 Advanced Console Manager User Guide 249
Events
On this Maintenance > Events page, you can define what action you want to take for events that
may occur in the SLC unit.
1. Click the Maintenance tab and select the Events option. The following page displays:
Figure 12-13 Maintenance > Events
2. Enter the following:
Event Trigger From the drop-down list, select the type of incident that triggers an event. Currently,
the options are:
Receive Trap
Temperature Over/Under Limit (for Sensorsoft devices)
Humidity Over/Under Limit (for Sensorsoft devices)
Device Port Data Drop
No Internal Modem Dial Tone
Action From the drop-down list, select the action taken because of the trigger. For
example, the action can be writing an entry into the syslog with details of the event
or sending the trap(s) to the Ethernet or modem connection.
Ethernet For actions that require an Ethernet connection (for example, Forward All Traps to
Ethernet), select the Ethernet port to use.