Filter
Top Products
1-2SectionSystem Configurations
11
1-2-7 OMRON PT Connections
In a 1:1 NT Link, a CPM2B can be connected directly to a Programmable Termi-
nal through the RS-232C port. (The Programmable Terminal cannot be con-
nected directly to the peripheral port.)
An OMRON PT can also be connected to the CPM2B with a host link connection.
Either the RS-232C port or peripheral port can be used for a host link connection.
Connecting Cable
XW2Z-200T (2 m)
XW2Z-500T (5 m)
NT-AL001-E
RS-232C Adapter
XW2Z-070T-1 (0.7 m)
XW2Z-200T-1 (2 m)
CS1W-CN114
(0.05 m)
CPM2B CPU Board
OMRON
Programmable
Terminal
RS-232C port
(D-sub 9-pin)
CPM1-CIF02
RS-422
Adapter
RS-422
connection
Peripheral port
CPM1-CIF01
RS-232C Adapter
Connecting Cable
XW2Z-200T (2 m)
XW2Z-500T (5 m)
Note The Programmable Terminal cannot be connected through the peripheral port
for direct access.