Filter
Top Products
37
Area Access (SN Keyfob/Remote # 1 - 60)
Cmd Loc 119 120 121 122 123 124 125 126
User # 1 2 3 4 5 6 7 8
Cmd Loc 127 128 129 130 131 132 133 134
User # 9 10 11 12 13 14 15 16
Cmd Loc 135 136 137 138 139 140 141 142
User # 17 18 19 20 21 22 23 24
Cmd Loc 143 144 145 146 147 148 149 150
User # 25 26 27 28 29 30 31 32
Cmd Loc 151 152 153 154 155 156 157 158
User # 33 34 35 36 37 38 39 40
Cmd Loc 159 160 161 162 163 164 165 166
User # 41 42 43 44 45 46 47 48
Cmd Loc 167 168 169 170 171 172 173 174
User # 49 50 51 52 53 54 55 56
Cmd Loc 175 176 177 178
User # 57 58 59 60
Default 1 (All Locations)
Range 0 - 255 (All Locations)
Options:
0 Disabled
1 Area 1
2 Area 2
4 Area 3
8 Area 4
16 Area 5
32 Area 6
64 Area 7
128 Area 8
Comments
If the system is divided into areas, this option deter-
mines the area(s) associated with each SpreadNet
SN991-REMOTE or SN961-KEYFOB. The SpreadNet
remotes and keyfobs are associated with a specific
user number and will arm or disarm all assigned areas
at the same time. The value programmed into the spe-
cific location is the total of all areas the remote/keyfob
will be able to access. To send a Panic report from a
keyfob or remote, the Police Soft Zone (Block 2, CL
156) must also be enabled.
NOTE: If the user code for the specific user number is
disabled, the remote or keyfob will not work. The
SN991-REMOTE or SN961-KEYFOB may be assigned
to any or all areas to which the user has authority (see
Block 9, CL 034 - 093).
Block 9 - Partition (Area) Programming (cont.)
User Codes (User # 1 - 60)
Cmd Loc 001 002 003 004
User #1 5 8 3 2
Cmd Loc 005 006 007 008
User #2 0 0 0 0
Cmd Loc 009 010 011 012
User #3 0 0 0 0
Cmd Loc 013 014 015 016
User #4 0 0 0 0
Cmd Loc 017 018 019 020
User #5 0 0 0 0
Cmd Loc 021 022 023 024
User #6 0 0 0 0
Cmd Loc 025 026 027 028
User #7 0 0 0 0
Cmd Loc 029 030 031 032
User #8 0 0 0 0
Cmd Loc 033 034 035 036
User #9 0 0 0 0
Cmd Loc 037 038 039 040
User #10 0 0 0 0
Cmd Loc 041 042 043 044
User #11 0 0 0 0
Cmd Loc 045 046 047 048
User #12 0 0 0 0
Cmd Loc 049 050 051 052
User #13 0 0 0 0
Cmd Loc 053 054 055 056
User #14 0 0 0 0
Cmd Loc 057 058 059 060
User #15 0 0 0 0
Cmd Loc 061 062 063 064
User #16 0 0 0 0
Cmd Loc 065 066 067 068
User #17 0 0 0 0
Cmd Loc 069 070 071 072
User #18 0 0 0 0
Cmd Loc 073 074 075 076
User #19 0 0 0 0
Cmd Loc 077 078 079 080
User #20 0 0 0 0
Cmd Loc 081 082 083 084
User #21 0 0 0 0
Block 10 - User Code Programming
Comments
Each user code is a 4-digit code which may be used to arm and
disarm the system or to bypass zones. Valid entries are the digits
0 - 9. To disable a user code, enter 0-0-0-0 (default code for all
user codes except user #1).
User code authority is programmed in Block 1, CL 021 - 080.
User codes are programmed with 1 digit per Cmd Loc.
System Master Code
Kidwatch Code
Area 1 Master Code
Area 1 Maid Code
Area 2 Master Code
Area 3 Master Code
Area 2 Maid Code
Area 3 Maid Code
Area 1 Relay Code
Area 2 Relay Code
Area 1 Duress Code
Area 2 Duress Code