Filter
Top Products
22
Telephone Number (RPS Callback)
Cmd Loc 085 086 087 088 089 090 091 092
Cmd Loc 093 094 095 096 097 098 099 100
Default 14 (All Locations)
Range 0 - 15 (All Locations)
Comments
Determines the format
used for all dialing opera-
tions.
Dial Type
Cmd Loc 101
Default 1
Range 1 - 3
Options:
1 DTMF (5 tones/sec)
2 Pulse
3 DTMF/Pulse Alternating (DTMF first)
Comments
Determines the number of times the digital communicator will attempt to
place a call (per phone number) before reporting a comm fail. To set up
the system as a local panel (non-reporting), enter 0 into this location.
Dial Attempt Limit
Cmd Loc 102
Default 6
Range 0 - 15
Comments
This is the ring cadence used by the local telephone
system. In a double-ring system, two rings count as
a one.
Telephone Ring Cadence
Cmd Loc 103
Default 2
Range 1 - 2
Options:
1 Single Ring
2 Double Ring
Comments
This option determines the
procedure the system will
use when answering incom-
ing phone calls.
Ring Count to Answer
Cmd Loc 104
Default 15
Range 1 - 15
Options:
1 Auto-Answer Disabled
2 - 14 Number of Rings Before Answering
15 Answering Machine Bypass
Block 4 - Digital Communicator Programming (cont.)
Telephone Number (Receiver #1)
Cmd Loc 053 054 055 056 057 058 059 060
Cmd Loc 061 062 063 064 065 066 067 068
Default 14 (All Locations)
Range 0 - 15 (All Locations)
Comments
Each telephone number may be
up to 16 digits long. Acceptable
values are the digits 0 - 9 and the
special characters shown at the
right.
Options:
0 - 9 Dialing Digits
10 Dial Tone Detect
11 Not Used
12 * [Star Key] - Not Available
with Pulse Dialing
13 # [Pound Key] -Not Avail-
able with Pulse Dialing
14 End of Number - All Cmd
Locs following this charac-
ter are ignored
15 5 second Dialing Pause
Telephone Number (Receiver #2)
Cmd Loc 069 070 071 072 073 074 075 076
Cmd Loc 077 078 079 080 081 082 083 084
Default 14 (All Locations)
Range 0 - 15 (All Locations)
Comments
In a partitioned system, this is the account number for area #5.
Account #5
Cmd Loc 029 030 031 032 033 034
Default 000000
Range 0 - 15 0 - 15 0 - 15 0 - 15 0 - 15 0 - 15
Comments
In a partitioned system, this is the account number for area #6.
Account #6
Cmd Loc 035 036 037 038 039 040
Default 000000
Range 0 - 15 0 - 15 0 - 15 0 - 15 0 - 15 0 - 15
Comments
In a partitioned system, this is the account number for area #7.
Account #7
Cmd Loc 041 042 043 044 045 046
Default 000000
Range 0 - 15 0 - 15 0 - 15 0 - 15 0 - 15 0 - 15
Comments
In a partitioned system, this is the account number for area #8.
Account #8
Cmd Loc 047 048 049 050 051 052
Default 000000
Range 0 - 15 0 - 15 0 - 15 0 - 15 0 - 15 0 - 15
Comments
In a partitioned system, this is the account number for area #3.
Account #3
Cmd Loc 017 018 019 020 021 022
Default 000000
Range 0 - 15 0 - 15 0 - 15 0 - 15 0 - 15 0 - 15
Comments
In a partitioned system, this is the account number for area #4.
Account #4
Cmd Loc 023 024 025 026 027 028
Default 000000
Range 0 - 15 0 - 15 0 - 15 0 - 15 0 - 15 0 - 15